Description
- brake Magura MT7 PRO brake lever is made from unique Magura Carbotecture SL® material which Magura developed for their whole magura MT brake series lineup
- Carbotecture SL® brake master consists of a composite material made of polymers and embedded carbon fibres. This combination makes the brake master light and extremely resistant.
- ergonomic aluminium Magura HC 1-finger brake lever blade delivers very comfortable feel in combination with amazing braking power only on 1-finger
- brake lever can be dismounted very easily without removing your grips or shifters etc.
- the radial master piston design reduces friction and enables small/large transmission ratios. This reduces transmission losses and makes the brake more sensitive and easier to modulate
- very easy bleeding thanks to the EBT (Easy Bleed Technology) port – without necessary special inserts in the brake lever
- MT7 PRO offers tooless setting of the lever blade distance from the handlebars
- kevlar reinforced 5mm brake hose is very durable and with smooth brake fluid delivery
- caliper brake mounts are Post Mount (PM), which is compactible with the most of the modern bike frames / forks
- brake is supplied with 2200mm long brake hose, which all necessary tools and inserts for shortening to desired lenght
- brake is supplied bleeded and filled with minerail Royal Blood fluid, resp. you can use it immediately
- brake weight: 255g including full hose lenght (without disc rotor and bolts)
Recommendations
- we recommend to use it with brake rotos Magura STORM HC, or Magura MDR-C, which are available in 160mm / 180mm / 203mm diameters
- for harder aplications like downhill or hard enduro is possible to use unique disc rotors Magura MDR-P with aluminium inner ring and outer steel ring, which are available in 180mm / 203mm / 220mm diameters
- Magura MT7 PRO brake is possible to combine with Magura Shiftmix SRAM and SHIMANO shiffter clamps (sold sepparately – Magura Shiftmix)
Important notice
For correct instalation please read the manual delivered with the brake!
For proper instalation of the lever is necessary to mount the brake clamp correctly – with the arrows on the clamp (pointing up). There is necessary to tight the upper bolt on clamp so it touches the brake lever body without any gap! Than tight the bottom bolt to the maximum 4Nm! There will be small gap on bottom between the clamp and brake body. Overtightening can cause damage of the brake clamp or lever body! This overtightening is not covered with the warranty!
5-Year leak proof warranty
Magura offers 5 year leak proof guarantee! MAGURA grants the FIRST BUYER a 5-year leak proof guarantee on brake masters, calipers and cylinders if the brake is mounted on a bicycle as original equipment or has been purchased from a dealer as a retrofit. The guarantee is valid for five years from the date of purchase. Registration for the 5-year leak proof guarantee is not necessary.
Reviews
There are no reviews yet.